AiM MyChron3 XG Log - Manual (Page 59)

Here above you can see a short description of all the pushbuttons that can be
used to configure your MyChron 3 Plus/Gold/Gold XG:
• General: with this pushbutton you activate the Logger manager main
window;
• Configuration: this pushbutton will open a very useful dialog box, where
the user is allowed to set the temperature and pressure alarm values,
the RPM shift light threshold values, the RPM and speed parameters
and the measure units;
• Channels: by using this option you may visualize the sensors installed
on your vehicle;
• Customize sensor: this pushbutton allows the user to customize a
sensor, setting the sensor’s calibration curve;
• Logger identification: this button allows the user to detect the
characteristics of the data logger connected to the PC;
• Transmit: once configured the data logger, the parameters have to be
transmitted to the instrument by clicking this button;
• Receive: if you connect to a PC a data logger of whom you do not know
the configuration, you may detect its configuration, by clicking the
Receive button, and to save it in the configuration’s database;
59