AiM MyChron3 XG Log - Manual (Page 40)

When the gauge is switched on, the display shows the last
selected measures during race time: for instance, if you were
visualizing speed, temperature 1 and temperature 2, the display
will show these channels. Moreover, the gauge saves the
backlight status (switched on or off) and restores the previously
saved status when the gauge was switched on.
Your gauge’s memory is divided into two separate parts. In the
first one it is stored the sampled channels and it has 45 minutes
(MyChron 3 Plus) or 3 hours (MyChron 3 Gold/Gold XG)
maximum storage time. In the second one it is only stored the
lap times, the split times and the maximum / minimum values of
speed, RPM and channels number 1 and 2 for each lap.
If during race the “sampled channels” memory fills up, the
following text will be displayed:
Measures mem full
The gauge will keep on recording the lap/split times and the
channels’ maximum/minimum values.
If, otherwise, the “maximum/minimum values” memory fills up,
the following text will be displayed:
Lap Memory full
The gauge will keep on recording the channels’ values.
When both memories are full, the following text will be
displayed:
Memory full
40