AiM MyChron3 XG Log - Manual (Page 41)

In this situation, the data logger works only as a “dash” and
does not samples any more data. It is recommended to
download the data stored in the gauge’s memory and to clear it.
When a test is completed, the system displays the last lap number and last lap
time. Using button MEM/OK you will access the data stored in system’s memory.
Let’s now see how to retrieve data after the completion of a test.
Viewing data
per best lap
time
To view the data for the lap with the best lap time, press
MEM/OK while in general display mode.
The best lap time is displayed for the most recent test. The
lap time will be flashing, signaling that this is the best time for
the current test.
The instrument will also show the test and lap number and
the maximum values corresponding to channels number 1
and 2 for the current lap.
If button MEM/OK is pressed a second time, it will appear the
minimum values corresponding to channels number 1 and 2
and minimum RPM for the best lap.
If you press button VIEW in one of the two previously
described display pages, the display will show the maximum
values corresponding to speed and to channels number 1
and 2.
Press button VIEW again to quit replay mode or press button
MEM/OK to view the minimum values corresponding to speed and
to channels number 1 and 2.
41