AiM MyChron3 XG Log - Manual (Page 89)

Setting the circumference wheel
• Select the “Wheel circumference” option.
• Press
MEM/OK to enter edit mode.
• Press MENU/<< until the correct number appears.
• Press >> to switch between digits.
• Press MEM/OK to save or VIEW to quit.
Setting the pulses per wheel revolution
• Select the “Pulses on wheel” option.
• Press
MEM/OK to enter edit mode.
• Press MENU/<< until the correct number appears.
• Press >> to switch between digits.
• Press MEM/OK to save or VIEW to quit.
Setting the maximum RPM value
• Select the “Max RPM value” option.
• Press
MEM/OK to enter edit mode.
• Press MENU/<< or >> to select the desired RPM value.
• Press MEM/OK to save or VIEW to quit.
Setting the RPM factor
• Select the “Spark for revs” option.
• Press
MEM/OK to enter edit mode.
• Press MENU/<< or >> to select the desired value.
• Press MEM/OK to save or VIEW to quit.
89