AiM MyChron3 XG Log - Manual (Page 23)

Night Vision MyChron 3 Plus/Gold/Gold XG display can be set to
backlight display so that it is visible during night racing.
To set the Night Vision ON or OFF, press button MEM/OK
until you see
NIGHT VISION ON/OFF
and then push button MEM/OK. To return to main display
mode press button VIEW. When the Night Vision option is
activated, a light globe will be displayed in the display’s top
right corner.
To activate Night Vision mode during a test, it is enough to
press button MENU/<<.
The backlight setting is stored by the logger: each time the
logger is switched on, the setting used before switching off
the gauge is automatically restored
Clear test data The “Clear test data” option clears the data stored in system’s
memory.
To run this function, after having entered the
CONFIGURATION MODE, push MENU/<< until you see
CLEAR TEST DATA
Then press button MEM/OK twice to erase data or press
VIEW to quit.
23