AiM MyChron3 XG Log - Manual (Page 35)

Spark for Revs This option represents the number of spark signals, acquired
from the coil or the ECU, per engine revolution.
To set the Spark for Revs, after having entered the
CONFIGURATION MODE, push MENU/<< until you see
SPARK FOR REVS
Then push MEM/OK to enter EDIT MODE and use buttons
MENU/<< or >> to scroll between six standard values: x1, x2,
/2, /3, /4 and /6. For instance, the correct value for a 4 strokes
4 cylinder engine is /2.
Press button MEM/OK to save the changes or button VIEW to
discard the changes.
Temperature
unit of
measure
This function sets the temperature’s unit of measure: the user
may choose between Celsius [°C] and Fahrenheit [°F]
degrees.
To run this function, after having entered the
CONFIGURATION MODE, push MENU/<< until you see
FAHRENHEIT/CELSIUS
Then push MEM/OK to enter EDIT MODE and use button
MENU/<< till you don’t see the proper Temperature unit of
measure, and confirm it pushing MEM/OK. Press button VIEW
to discard the changes.
The symbols °C or °F will appear on the left of the display.
35