AiM MyChron3 XG Log - Manual (Page 91)

91
• Set the correct input channels by double-clicking in the “Sensor type”
column.
• Click “Configuration” button and set the following parameters:
• Message language;
• Wheel circumference and pulses per wheel revolution;
• Shift light led;
• RPM multiply factor and RPM maximum value;
• Channels’
alarms;
• Speed, temperature and pressure unit of measure;
• Beacon receiver obscuring time and number of splits;
• Transmit the configuration to the instrument by pressing the “Transmit”
button.
• Calibrate/autocalibrate the sensors (potentiometers, accelerometer,
gyroscope and gear sensor).
• Transmit the calibration to the instrument by using button “Transmit
calibration”.