2N Analogue UMTS gateway 2N SmartGate UMTS - Manual, 1699 v1.1.0 - Manual (Page 8)

Product Description 1.1
8
1.1 Product Description
Basic Features
n The primary purpose of 2N® SmartGate UMTS is to transmit voice between
UMTS/GSM network and attached phone terminals. You can connect terminal
with FXO interface (trunk line of PBX, phone set, answering machine etc.) to
FXS interface on 2N® SmartGate UMTS (connector with phone icon) and
terminal with FXS interface (extension line of PBX) to FXO interface on 2N®
SmartGate UMTS (connector with crossed out phone icon).
n You can establish data connections (HSPA, UMTS, EDGE, GPRS, CSD) and
send/receive SMS using 2N® SmartGate UMTS in combination with a PC and
appropriate software.
n You can send an SMS to a pre-programmed number using the SMS sending
input.
n Version of SmartGate UMTS with Battery backup allows the function in case of
power failure.
Advantages of 2N® SmartGate UMTS use
n Call cost cutting – the calls are routed to UMTS/GSM or analog network
according to their number prefix. Route all UMTS/GSM calls from PBX to 2N®
SmartGate UMTS to save a lot on PSTN – UMTS/GSM calls.
n Easy installation – you can easy program 2N® SmartGate UMTS as you
need with enclosed SW.
n You get all you need in the delivery – your 2N® SmartGate UMTS delivery
contains all you need to operate the system (the power supply adapter,
telephone cables, PC serial cable, SMS input connector, CD-ROM with
software).
n Solution for sites without telephone lines – such as mountain chalets,
exhibitions, conferences, etc.
n DialThru technology – all your calls will be routed most cost-effective way.
n ME – Mobility Extension – you newer miss an incoming call from analog
network. Incoming call will ring on connected phone and on your mobile
phone too.
n CLIP - 2N® SmartGate UMTS is equipped with the FSK-based CLIP feature,
so if a terminal capable of receiving the CLIP is used you know the caller‘s
number.
n SMS sending input – simply send an SMS to a pre-programmed number by
closing the contact. Recommended for easy supervision, simple securing, etc.
n Radiation hazard minimization – you are not exposed to a direct effect of
the antenna RF electromagnetic field while telephoning as opposed to mobile
telephones.