2N Analogue UMTS gateway 2N SmartGate UMTS - Manual, 1699 v1.1.0 - Manual (Page 33)

Table of Parameters 3.2
33
Default setting: 425 Hz
Ringback tone – frequency 2 [Hz] Function No.: 127
Setting of frequency 2 of ringback tone.
Setting options: 1-3400 Hz
Setting step: 1 Hz
Default setting: 425 Hz
Ringback tone - cadence Function No.: 128
Ringback tone cadence setting.
Setting options:
OFF (0) -not generated, only network tone
1000/4000 ms (1) -cadence 1 s tone, 4 s pause
400/200/400/2000 ms (2) -cadence 2x400 ms tone,
2 s pause
1500/3500 ms (3) -cadence 1,5 s tone, 3,5 s pause
2000/4000 ms (4) -cadence 2 s tone, 4 s pause
Default setting: OFF
Tone after disconnection Function No.: 129
If the remote subscriber hangs up first, the 2N® SmartGate UMTS subscriber
can hear the tone selected here.
Setting options: Busy (0)-2N® SmartGate UMTS transmits the busy
tone upon call end.
Permanent (1) -2N® SmartGate UMTS transmits the
permanent tone upon call end.
Default setting: Busy tone
Volumes
Transmission volume Function No.: 190
Volume setting for UMTS/GSM transmission with a 4 dB step.
Setting options: 1-5
Setting step: 1
Default setting: 3 = medium volume level
Reception volume Function No.: 191
Volume setting for UMTS/GSM reception with a 4 dB step.
Setting options: 1-5
Setting step: 1
Default setting: 3 = medium volume level
Ringing signal settings
Ringing signal – frequency [Hz] Function No.: 140
Ringing signal frequency setting.