2N Analogue UMTS gateway 2N SmartGate UMTS - Manual, 1699 v1.1.0 - Manual (Page 16)

Description 2.1
16
Dialing end signaling
n Only
n Dialing reception has been terminated. Connection is being established.
PIN tone
n
n Enter the PIN code.
n This tone is transmitted upon power up if the PIN has to be entered manually.
PUK tone
n
n Enter the PUK code.
n This tone is transmitted upon repeated wrong PIN entering attempts. SIM
card is blocked.
Telephone Line Tones – Programming Mode
Tones confirming/refusing the values entered are transmitted during telephone line
based programming. Each tone has a different melody.
Confirmation
n
n Confirms that the service password or parameter number entered is correct
and has been accepted.
Refusal
n
n Incorrect parameter number;
n Incorrect parameter value
n Transmitted when a parameter is cancelled with a .
Saving
n
n Parameter value entered is correct and has been saved