2N Analogue UMTS gateway 2N SmartGate UMTS - Manual, 1699 v1.1.0 - Manual (Page 41)

Table of Parameters 3.2
41
Add Function No.: 396
The Add parameter is used for automatic call routing. A defined string (prefix) is
added to the beginning of the number to be dialed.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank
Extra tariff Function No.: 397
Pseudo tariff metering setting (tariff is based on call duration) for UMTS/GSM
calls. Connected PBX must send tariff metering pulses for FXO calls. The Extra
tariff parameter defines transmitting of fixed quantity of tariff pulses after call
start. This parameter sets minimal call cost.
Setting options: 0-255
Setting step: 1
Default setting: 0
Tariff [s] Function No.: 398
Pseudo tariff metering setting (tariff is based on call duration) for UMTS/GSM
calls. Connected PBX must send tariff metering pulses for FXO calls. The Tariff
parameter sets the call cost according to call duration. Set how often in seconds
do you want to transmit pulses. Smaller number means more expansive call. 0
means not to transmit pulses according to call duration.
Setting options: 0-255 s
Setting step: 1 s
Default setting: 0 sFAX/DATA routing parameters
Time limit [min] Function No.: 399
After time elapsing is call connection terminated immediately. You can hear beep
30s before end of call. 10s before end you can hear beep every second. The "0"
setting means that the function is disabled.
Setting options: 0-255 min
Setting step: 1 min
Default setting: 0 min
FXO routing table parameters
All parameters related to the dialed number and call routing are arranged in three
routing tables. Each table pertains to one interface: FXS, FXO and UMTS/GSM.
Calls from FXO interface are routed according to “FXO calls rote to” parameter. You
can set 2N® SmartGate UMTS as DialThru gateway or as gateway for extension line of
PBX.
You can program ME function for the DialThru gateway.
For gateway for extension line of PBX you can fill in the FXO routing table. According
to the prefix of dialed number on FXO interface you can:
n Bar the number to be dialed – 2N® SmartGate UMTS hangs up, the call isn’t
established;
n Accelerate connection establishing by knowing the number length for the
given prefix;