2N Analogue UMTS gateway 2N SmartGate UMTS - Manual, 1699 v1.1.0 - Manual (Page 49)

Table of Parameters 3.2
49
ATTENTION - find out if you have to pay for this function. Every check can lower
your credit.
Setting options: 0-8 characters (0-9,*,#,+)
Default setting: blank
Minimal credit Function No.: 712
Set minimal credit value to send warning SMS "LOW CREDIT". If credit is lower
then given value, warning SMS is send after every credit check, until you
recharge your SIM card.
Setting options: 0-999
Step: 1
Default setting: 0
Credit value position in received SMS Function No.: 713
If there are more numbers except credit value in text answer (e.g. date, time
and so on) 2N® SmartGate UMTS seeks the number corresponding with credit
value from given position in text. The seek algorithm skips every non-number
character. If credit value is the first number in text you can leave setting 0. If
there are other numbers before credit value, set parameter to text position, from
which the algorithm will seek.
Setting options: 0-180
Step: 1
Default setting: 0
Telephone number for service SMS Function No.: 714
Telephone number for service SMS. The number is common for GGMC SMS and
"LOW CREDIT" SMS on prepaid SIM cards.
Setting options: 0-16 characters (0-9,*,#,+)
Default setting: blank
Service Parameters
Hardware version Function No.: -
2N® SmartGate UMTS hardware version - for information only (cannot be
modified). Must be used for communication with the manufacturer.
Firmware version Function No.: -
2N® SmartGate UMTS firmware version - 2N® SmartGate UMTS central
processor program version. The manufacturer can issue upgrades to extend
functions. To load new firmware into 2N® SmartGate UMTS use the Upgrade
function. Keep communicating with the manufacturer.
Serial number Function No.: -
2N® SmartGate UMTS serial number - for information only (cannot be changed).
Must be used for communication with the manufacturer.