2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 71)

Table of Programmable Parameters 3.2
71
PING
The PING function allows for checking the connection with the defined server.
Enable
Enable the function.
ICMP echo server
Define the server to be checked by the PING service.
Setting options: server name or IP address
Interval
Set the checking interval for the server connection check.
Timeout
Set the maximum server response time.
Max failures before re-connect
Set the maximum count of attempts before the Peer-to-Peer Protocol (PPP) is
restarted in 2N
® EasyRoute.
Setting options: 0 to 1,000 (0 – no restart, 0 is not displayed)
Notification limit
A notification SMS is sent when the set value is reached. The PINGs must come in
a sequence to be considered.
Erase statistics
Set the PING rate statistics deleting command.
Min / Avg / Max time
The counter showing the response returning time from the server is displayed.
Count of errors / Total count
The counter showing all PINGs and errors is displayed. The statistic data are
floating.