2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 53)

Table of Programmable Parameters 3.2
53
Tip
n Refer to S. 4 of this User Manual for table setting examples.
SETUP Menu > Hotspot
Hotspot is a function allowing a user to access, on a time or data (FUP) basis, the
Internet with the aid of a valid access password (ticket). It is intended for Internet
coffee bars and similar public facilities. This function makes it possible to calculate
connection costs easily.
The SNTP (Simple Network Time Protocol) must be active for Hotspot to work reliably.
The default setting is the NTP server ‘ntp.nic.cz’, or any other NTP server in the case
of troubles.
After Hotspot activation, any user without the admin rights is redirected to the web
page for filling in the access key.
The Sale item is accessible both for the Administrator and Operator.
Basic
Enable Hotspot
Enable the Hotspot function. The parameters set here will be used as default
values for the Operator’s sale.
Time of connection
Set the value of the time limited connection starting from the password-based
login.
Setting options: 1 minute to 60 days