Table of programmable parameters 3.2, 60 wlan > basic, Wlan > security – 2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 User Manual
Page 60
Table of Programmable Parameters
3.2
60
WLAN > Basic
Enable
Enable/disable the WiFi transmitter.
Network name (SSID)
SSID (Service Set Identifier) is a string of up to 32 characters sent as a unique
WiFi network identifier to users.
Channel
Set the channel to be used in the particular WiFi bandwidth (2.4/5 GHz) manually
or automatically.
Setting options:
Auto
Available channels
Tx power
Set the Tx power for the gateway WiFi transmitter.
Setting options:
Auto
Max
0–17 dBm
Beacon
Set the beacon frame for regular SSID sending onto the WiFi interface.
Setting options:
15–65,535 ms
RTS
The RTS value gives the packet size limit in bytes below which the CSMA/CA and
above which the RTS/CTS flow control should be used. Set the parameter to the
maximum value in the AP mode.
Setting options:
0–2346 B
Frag
Set the maximum size of packets for a wireless network.
Setting options:
0–2,346 B
WLAN > Security
System
Set the 2N
®
EasyRoute WiFi interface security system.
Setting options:
OFF
WEP
WPA
WPA2
WPA+WPA2
Key format
Set the WiFi interface security key format.
Setting options:
ASCII/HEX