beautypg.com

1 2n, Easyroute configuration, Pc connection – 2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 User Manual

Page 18: 2n® easyroute configuration 3.1

background image

2N® EasyRoute Configuration

3.1

18

3.1 2N

®

EasyRoute Configuration

2N

®

EasyRoute is configured via a user-friendly network web interface. 2N

®

EasyRoute

is factory set to make administration as easy as possible.

PC Connection

You have received a Fast Ethernet cable for PC connection. The DHCP server is active

in the gateway and assigns your PC an IP address ranging from 192.168.1.100 to

192.168.1.200 by default. When your 2N

®

EasyRoute gets connected to the PC and

reads the IP address, enter the IP address 192.168.1.1 into your web browser to get

access to the 2N

®

EasyRoute web interface for configuration. The following login

dialogue is displayed.


To enter the web interface enter the correct username and password. The default

values for the Administrator are as follows:

n

Initial username:

Admin

n

Password:

2n

The Administrator has full access to all device settings except for the Operator

password.

The default values for operator are as follows:

n

Initial username:

Operator

n

Password:

2n

The Operator is qualified to operate the time limited connection system – Hotspot. The

Operator has access to the following menus only:
Hotspot > Sale - Time limited connection selling;
Status -

Information about the mobile network connection;

Setting -

Operator password settings.


The default values for the User are as follows: