2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 12)

Description 2.1
12
2.1 Description
2N ® EasyRoute consists of a plastic-encased GSM/UMTS gateway, removable antenna
and telephone network/LAN connecting cables.
The 2N
® EasyRoute status is indicated by the LED on its front side. All possible states
are described in the following figure.
Power Supply
Blue light Power supply is connected.
No light Power supply is not connected.
GSM / WiFi Network
Yellow flashing UMTS/GSM network is active *)
Yellow, no light UMTS/GSM network is inactive.
Green flashing WiFi network is active *)
Green, no light WiFi network is inactive.
*) The LED lighting time depends on the data traffic
intensity:
short flash
… active network, low traffic;
up to 1s flash … peak network data traffic.
Telephone Line
No light Standby (relax, on-hook)
Quick flashing Off-hook or ringing
Light Active call
Restart (Reset)
button Power supply
connector
(2.1 mm DC jack)
Telephone line
connector
(RJ 12, 6/2)
Four-port Fast
Ethernet switch (RJ45)
Figure 2.1
2N ® EasyRoute
LED Indicators
Figure 2.2
2N ® EasyRoute
Connectors