2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 6)

Product Description 1.1
6
1.1 Product Description
The 2N ® EasyRoute GSM/UMTS gateway is a new product, which has been developed
and manufactured to provide the maximum utility value, quality and reliability. We
hope you will be fully satisfied with 2N ® EasyRoute for a long time. Therefore, use
your 2N ® EasyRoute for purposes it has been designed and manufactured for, in
accordance herewith.
2N
® EasyRoute is available in two basic versions with different hardware capacities.
The basic version is designed for Internet connection and UMTS/GSM calls. The FAX
version, in addition, supports VoIP voice transmission and VoIP FAX transmission
using the T.38 protocol. The parameters are distinguished as follows.
n The 2N
® EasyRoute basic version parameters are designated as ER.
n The 2N
® EasyRoute FAX version parameters are designated as ERF
(VoIP).
Tip
n You can identify your gateway easily: A gateway that enables FAX and
VoIP calls is an ERF version.
n To make sure, select the SETUP > Telephony menu. If the menu
includes the SIP and FAX submenus, your gateway is ERF. If not, it is ER.
Basic Features
n 2N ® EasyRoute combines the support of a circuit switched telephone network
interface (FXO), Fast Ethernet switch and WiFi network support.
n 2N ® EasyRoute provides a continuous broadband Internet connection for
multiple users via the Fast Ethernet switch or the 2N ® EasyRoute WiFi
network.
Advantages of 2N
®
EasyRoute Use
n Fast data connection
2N ® EasyRoute transmits data using the high speed HSDPA connection (up to
7.2 Mbps).
n Call cost cutting
Forwarding GSM calls to 2N ® EasyRoute saves a lot on PSTN – GSM calls.