2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 47)

Table of Programmable Parameters 3.2
47
Number
Set the user or device name to be displayed to the opponent (if the network
allows so).
Username
Set the user name to be used for registration.
Password
Set the authorisation password for registration.
SIP > Flood ERF
Enable
Enable/disable the use of the Flood function.
Port
Set the port to which stimulation packets should be sent.
Packet size
Set the size of the stimulation packet.
Period
Set the time intervals for stimulation packet sending.
Tip
n The Flood function has been developed to compensate the initial data
transmission slowness in the UMTS network. Thus, 2N ® EasyRoute sends
stimulation packets at preset intervals to achieve the optimum data flow
at initial stages of bulk data transmissions. The default value is Enabled.
n Do not disable this function to avoid connection errors at the beginning of
VoIP and T.38 FAX calls.
FAX > Basic ERF
Enable
Enable the FAX function.