2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 51)

Table of Programmable Parameters 3.2
51
n If necessary, ask a skilled technician for advice.
Baby Call
An off-hook initiates the countdown defined in the Dialling timeout parameter. If
no dialling is made within this timeout, the pre-set telephone number is dialled
automatically. If any digit is dialled, the Automatic call (also referred to as
BabyCall) function is cancelled.
Enable
Here enable/disable the Automatic Call function.
Number
Here enter the number to be used for the Automatic Call.
Setting options: 0–31 characters (0–9, *, #, +)
Timeout
Set the time interval between the line off-hook and the beginning of the Automatic
Call (if enabled). During this timeout, 2N ® EasyRoute waits for a dialling to cancel
the Automatic Call. Thus, you can make standard calls even if the BabyCall
function is enabled.
Routing
Routing mode
The lower screen menu helps you set the mode of the routing table use.
Setting options:
All to GSM: 2N ® EasyRoute routes all calls to the GSM network regardless of
the routing table settings.
All to VOIP: 2N ® EasyRoute routes all calls to the VoIP network regardless of
the routing table settings. Available in the FAX version only.
Use table: 2N ® EasyRoute routes all calls to the GSM or VoIP network
according to the routing table settings.
Prefix
Enter the call type identifying prefixes (GSM, trunk, free, etc.). The Others row is
used for calls with prefixes that are not included in the table. One empty row is