2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 23)

Table of Programmable Parameters 3.2
23
Internet
Status
Displays the current status of data connection to the provider.
Disconnected Data connection has not been established.
Connected Data connection has been established.
Connecting Data connection is being established.
Disconnecting Data connection is being cancelled.
Route
Displays the currently used Internet connection technology.
WAN Data connection established through the WAN port.
UMTS/GSM Data connection established through the wireless
network.
ADSL/PPPoE Data connection established through the ADSL modem.
Traffic
Displays the current gateway traffic per second. Download/Upload. The value
indicates the amount of transmitted data and the value in parentheses shows the
count of transmitted packets.
Cellular
Signal
Displays the current strength of the receiving signal in [dBm].
Operator
Displays the name of the SIM card provider. If the SIM card cannot log in to a
network (e.g. requires the PIN), the Limited service message is displayed.
Connection type
Displays the type of 2N ® EasyRoute connection to a wireless network (GSM,
EDGE, GPRS, UMTS, HSDPA/HSUPA, etc.).
FUP limit
Displays the counter capacity according to FUP parameters.
Disabled FUP not allowed.
0 – 100% Counter filling percentage; 100% results in Internet
disconnection.