2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 46)

Table of Programmable Parameters 3.2
46
Codec 1 to 5
Set the priorities of codecs 1 to 5. The lower the number, the higher the priority.
If you set none, codec G.729 will be used.
Setting options: G.729, G.723, PCMU, PCMA
Default settings: Codec 1 – G.729
Codec 2 – G.723
Codec 3 – PCMU
Codec 4 – PCMA
Codec 5 – Unused
Note
n Currently, 2N ® EasyRoute supports four types of codecs. They are: G.729,
G.723, PCMU and PCMA. Codec 5 is reserved for future extension of the
codec range. So do not change the default values of Codec 5 for the time
being (Unused).
SIP > Account ERF
Enable registration
Enable 2N® EasyRoute to register the selected account to the VoIP provider.
Registrar
Set the IP address or domain name for the registrar server.
Proxy
Set the IP address or domain name of the SIP proxy that 2N ® EasyRoute uses for
calling.
Port
Set the port to which the registration packet for the registrar and signalling for the
SIP proxy are sent. Find this parameter behind the server address.
Domain
Set the IP address or domain name used by 2N® EasyRoute.
Display
Set the user or device name to be displayed to the opponent (if the network
allows so).