2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 36)

Table of Programmable Parameters 3.2
36
Headset
Car kit (AEC) – for noisy environments
Speaker
RX AVC (Automatic Volume Control)
Enable/disable the automatic setting of the receiving signal volume.
RX AGC (Automatic Gain Control)
Enable/disable the automatic setting of the signal receive gain.
TX AGC (Automatic Gain Control)
Enable/disable the automatic setting of the signal transmit gain.
Volume
Here set the transmission and sidetone volumes.
Setting options: 0–7 (0 = muted, 7 = max)
Services
Enable GSM character set
Here enable/disable the GSM character set for SMS coding. This option is
automatically ticked off if none of the coding sets is selected.
Enable UCS2 character set
Here enable/disable the UCS2 (Unicode) character set for 16-bit SMS coding.
Enable multipart SMS
Here enable/disable sending of multipart SMS messages. A multipart SMS means
a message longer than 160 characters without or 70 characters with diacritic
symbols and special characters.
SMS database limit
Here set the maximum size of the SMS storing database. After the database is
filled up, incoming SMS messages are stored on the inserted SIM card and no
more SMS are sent and/or received. The user is notified of this fact by an error
message while sending SMS.
Setting options: 8–512 kB
Default setting: 16 kB