2N Wireless 3G router 2N EasyRoute_old design - User manual, 1571 v1.06 - Manual (Page 7)

Product Description 1.1
7
n Easy installation
2N ® EasyRoute is ready for immediate use without programming.
n You get all you need in the delivery
Your 2N ® EasyRoute delivery contains all you need to operate the system (power
supply adapter, telephone cable, Ethernet cable, antenna, CD manual).
n A solution for sites without telephone lines
2N ® EasyRoute is a perfect solution for such sites as exhibition halls,
mountain chalets, conference rooms, etc.
n CLIP
2N ® EasyRoute is equipped with the Calling line identification presentation
(CLIP) feature, so if a terminal capable of receiving the CLIP is used you know
the caller‘s number.
n Radiation hazard minimisation
Unlike mobile phones, 2N ® EasyRoute does not expose you to direct antenna
RF electromagnetic field radiation while telephoning.
n Full GSM/UMTS coverage
2N ® EasyRoute supports all GSM bands (1900, 1800, 900, 850MHz).
EasyRoute is available in version for all used UMTS bands (2100 1900, 900,
850MHz).
n Fast Ethernet switch
2N ® EasyRoute provides a 4-port Fast Ethernet switch for you to connect all
the required devices (using an external switch for a larger port extension).
n WiFi
2N ® EasyRoute helps you connect a PC and other devices using the WiFi 2.4
GHz or 5 GHz interface. The 802.11a/b/g standards and maximum
transmission rate of 54 Mbps are supported.
n VoIP – fax version (ERF)
2N ® EasyRoute enables directing calls from devices, connected to FXS port,
into VoIP network.
n FAX – fax version (ERF)
2N
® EasyRoute provides an option to send FAX messages using the T.38
protocol. All FAX messages are routed to the VoIP network.
Safety Precautions
Do not switch on 2N ® EasyRoute in the vicinity of medical apparatuses to
avoid interference. The minimum distance of the antenna and pacemakers
should be 0.5m.
Do not switch on 2N ® EasyRoute aboard of a plane.
Do not switch on 2N ® EasyRoute near petrol stations, chemical facilities or
sites where explosives are used.