Brother XL-6040 - Manual (Page 12)

1
KNOWING YOUR SEWING MACHINE
KENNENLERNEN IHRER MASCHINE
КРАТКОЕ ТЕХНИЧЕСКОЕ ОПИСАНИЕ МАШИНЫ 4 2
1
9
3
8
7
5
6
0
B
C
D
F
A
G
E
PRINCIPAL PARTS
1 BOBBIN WINDER (Page 28)
Winds the thread onto the bobbin to be used for the lower thread.
2 STITCH LENGTH DIAL (Page 13, 24)
Controls the length of the stitches.
3 SPOOL PIN AND SPOOL CAP (Page 28, 33)
4 UPPER TENSION CONTROL DIAL (Page 38)
Controls the tension of the upper thread.
5 BUTTONHOLE LEVER (Page 55)
* Not available on models XL-6040, XL-6041, XL-6042, and XL-
6043.
6 FLAT BED ATTACHMENT WITH ACCESSORY COMPART-
MENT (Page 12, 27)
7 ZIGZAG PRESSER FOOT (Page 3, 11)
8 REVERSE SEWING LEVER (Page 26)
Push for stitching in the reverse direction.
9 PATTERN INDICATION WINDOW (Page 13)
Shows the stitch number to be performed.
: HOLE FOR VERTICAL SPOOL PIN (Page 37)
Used to hold a second spool of thread for twin needle sewing.
A BALANCE WHEEL
B PATTERN SELECTION DIAL (Page 13)
Turn in either direction to select the desired stitch.
C MAIN POWER/SEWING LIGHT SWITCH (Page 7)
Turn on/off the main power/sewing light switch.
D FOOT CONTROLLER JACK (Page 5)
Insert the foot controller plug for operation and connect the
machine to the power supply.
E BUTTONHOLE FINE ADJUSTMENT SCREW (Page 61)
F PRESSER FOOT LEVER (Page 33)
G FOOT CONTROLLER (Page 8)
Used to control sewing speed/start and stop.
*