JLG 1230ES Service Manual - Manual (Page 96)

SECTION 5 - CONTROL COMPONENTS
5-20 – JLG Lift – 3121222
Battery Installation
See Section-1 of this manual for battery specifications.
5.9 BATTERY CHARGER - INSTALLATION
The battery charger is located in the compartment at the
rear of the machine, remove the charger/step-plate cover
to gain access to the charger.
Left Side Battery Installation
1. Batteries
2. Bolt
3. Hold Down Clamp 4. Washer
5. Locking Nut
6. Attach Battery Temperature
Sensor To This Terminal
Right Side Battery Installation
1. Batteries
2. Bolt
3. Hold Down Clamp 4. Washer
5. Locking Nut
1
2
3
4
5
6
Battery Charger Assembly - Installation
1. Battery Charger Assembly
2. Attach Screws/Washers 3. AC Voltage - Input Cable
4. LED/Power/Interlock Cables
LED/Power/Interlock Cable - Identification
1. Charger Interlock Cable
2. DC Power Cable to Batteries 3. LED Indicator, Battery
Temp. Sensor Cable