Snorkel TL39T - Manual (Page 45)

Rev C page 7-5
Visually inspect all welds for cracks, all structural
members for deformity.
Figure 7.14 - Chassis Welds
Pay particular attention to the chassis welds
Figures 7.15 - Boom Welds
Closely inspect boom welds all the way around, for
cracks.
■
Lanyard Anchor Points
Figure 7.16 - Lanyard Anchor Points
Visually check the lanyard anchor points to see
that they are not deformed or cut off and that the
securing bolts are tight and undamaged.
■
Platform Gravity Gate
Figure 7.17 - Platform Gravity Gate
Check to see that the gravity gate is present and
functions correctly.
■
Platform Guardrails
Figure 7.18 - Platform Guardrails
Visually inspect the platform guardrails to see that
none of the tubing has been cut out, removed, or
deformed in any way. Visually check the guardrail
welds to see that none is cracked nor ground down.
■
Platform Access Ladder
Figure 7.19 - Platform Access Ladder
7. Pre-operational Inspection