Snorkel TL39T - Manual (Page 40)

page 6-6 Rev C
■
Self Levelling Stabilisers (Option)
Figure 6.12 - Self Levelling Stabiliser
Controls
1. Auto Level / Stow Switch: Select either
auto level or auto stow, to raise or lower the
stabilisers automatically.
2. Manual Stabiliser Switches: Operate the
manual switches to manually raise or lower
individual stabilisers.
3. Leg Indicator Lights: Illuminate when the
legs are in contact with the ground.
4. Lift Enable Light: This is a duplicate of the
lift enable light on the lower control box. The
platform can only be raised when this light is
lit. When this light is not lit the platform will
not raise because the stabilisers are not set
properly.
NOTE:
Ensure that the front stabilisers are lowered first to
prevent damage to the jockey wheel.
Activate the rear stabilisers and level the machine
using the level bubble adjacent to the control
levers.
A IMPORTANT
Information on controls for non-standard
features (options) are shown in the Options
chapter.
A WARNING
Pinch points may exist between moving
components. death or serious injury can
result from becoming trapped between
components, buildings, structures, or other
obstacles. make sure all personnel stand
clear while operating the MHP.
6. Controls