Apple Macintosh System 7.5 - Manual (Page 78)

To set up your TCP/IP network connection, follow these steps:
1 Choose Control Panels from the Apple (
K
) menu.
The Control Panels window opens.
2 Double-click the TCP/IP icon to open it.
The TCP/IP control panel opens.
3 Use the “Connect via” pop-up menu to choose the port by which your computer is
connected to the network.
4 Use the Configure pop-up menu to choose a configuration method.
If you are connected using Ethernet, the pop-up menu looks like this:
See your network administrator or Internet service provider for detailed
instructions on configuring your TCP/IP connection.
70 Chapter 6
You may see different items in this list if you have
other kinds of networking software installed.
Click for Macintosh
Guide instructions on
how to configure this
control panel.