Apple Macintosh System 7.5 - Manual (Page 38)

Step 2: Set up your system
PowerTalk system software provides different levels of access security.
The most basic safeguard is the key chain access code. Your access code
provides access to all your network servers and services with a single
password. Until you set up and use your access code, your catalog and mail
services are locked (inaccessible).
IMPORTANT How you set up your system depends on whether you have access
to a server (called the PowerShare server) that manages network
communications. If you are not sure whether or not you have a PowerShare
server account, assume that you do not.
Setting up without a PowerShare server account
PowerTalk does not require the use of a network server. When you set up
without a server account, you can communicate using AppleMail or mail-
capable applications.
If you don’t have a PowerShare server account, follow these steps:
1 Choose Unlock Key Chain from the Special menu in the Finder.
If you wish, you can also open the Mailbox.
30 Chapter 3