Apple Macintosh System 7.5 - Manual (Page 36)

If you’re installing software from a CD: Open the System Software Installers
folder on the CD.
If you’re installing software over a network: Find the Installer on your file
server. If you’re not sure where it is, ask your network administrator.
3 Open the Installer by double-clicking its icon.
If you are installing from a CD, double-click the Install PowerTalk installer
alias.
4 When you see the PowerTalk Installer’s welcome screen, click Continue.
The Install PowerTalk dialog box appears. (The dialog box that appears on
your screen may look slightly different.)
5 Make sure that the destination disk indicated on the screen is the one on which you want
to install PowerTalk.
If the wrong disk name appears, click the Switch Disk button until the correct
disk name appears.
28 Chapter 3
Button to switch to a different
disk for installation
Disk on which
PowerTalk system
software will be
installed