Apple Macintosh System 7.5 User Manual

Page 40

Text mode
Original mode

Type your name and the access code you want to use.

IMPORTANT

Once your access code is set, you enter it each time your

computer starts up. You can leave the access code blank, if you do not want to
use a password.

Here are some tips for choosing an access code:
m It should not be your name.
m It must be at least six characters long. (The longer it is, the harder it will

be to guess.)

m Mix upper- and lowercase letters and use numbers, as in “4Me!Only.”
m Make it easy to remember and don’t write it down.
m Keep track of which letters are uppercase—the access code is case-

sensitive.

When a confirmation dialog box appears, type your access code again and click OK.

You can change your access code in the PowerTalk Setup control panel.

Chapter 3