Poison Spyder JK A-PILLAR LIGHT BAR MOUNTS FOR RIGID 50 LED User Manual

Installation instruc tio ns, Jk a-pillar light bar mounts for rigid 50” led

INSTALLATION INSTRUC

TIO

JK A-PILLAR LIGHT BAR MOUNTS FOR RIGID 50” LED

Thank you for purchasing Poison Spyder

products for your Jeep. Installation is fairly simple

with the right tools and good mechanical abilities.

If you are not confident in your mechanical skills,

please seek the help of a professional to perform

the installation. Please read through these entire

instructions before proceeding with installation.
IMPORTANT: Completely install and remove

these items prior to painting or powder coating.

This will allow you to check for fitment or do any

clearancing or fitting ahead of time, to reduce

the chance of damage to the finish during final

installation. Poison Spyder Customs Inc. is not

responsible for costs for or damage to paint or

powder coat finish under any circumstances,

including paint or powder coat of incorrectly

shipped or defective parts.

PARTS LIST
Please check your packages immediately upon

arrival to ensure that everything listed is included,

and to check for damage during shipping. If

anything is missing or damaged, call Poison

Spyder at (951) 849-5911 as soon as possible.

(1) Driver Side A-Pillar Light Bar Mount
(1) Passenger Side A-Pillar Light Bar Mount
(1) Driver Side A-Pillar Rubber Liner
(1) Passenger Side A-Pillar Rubber Liner

INSTALLATION NOTES
•

Re-use the factory hardware at the lower

corners of the windshield brackets.

•

This product is designed exclusively for

mounting the Rigid Industries 50” E-Series or

SR-Series LED light bars. No guarantee is

made regarding fitment of other brands of light

bars.

•

Routing of electrical cables is left to the

installer’s discretion. We have seen several

different methods of routing the cable, we

encourage you to do a search on the web for

ideas and tips for routing the cables.

•

With the SR-Series (single row) light bar, If

the light bar produces an annoying whistle or

harmonics at highway speeds, try flipping it

over. We have had the best results with the

light bar flipped so that the cables route down

the driver’s side.