Fast & Fluid II Series Blendorama - Manual (Page 21)

p20
© Fast & Fluid Management, Blendorama series II
D - Periodic maintenance
This maintenance should be carried out every 3 to 6 months depending
upon use.
> >
Inspect the function of the
valve and the canister for leaks Ensure that the machine is
disconnected from the power
source Remove canister from turntable
and drain colorant into a clean
container
> >
Remove stirrer paddle from
canister and wash the canister,
lid and stirrer paddle clean If required, tighten or replace
valve sleeve (with the wrench
supplied) Replace “O” ring seal
>
Reassemble and refit canister to
turntable Return colorant to dispenser
and prepare the pump for
operation (see chapter IV-A)
Attention! MOVING PARTS CAN CAUSE INJURY. Always turn off power
before accessing moving parts.