Fast & Fluid II Series Blendorama User Manual

Page 10

(3) Firmly push the canister
and connecting tube into the
remote bracket and pump
assembly.

(4) Fit this assembly to the
turntable. Canister screws
(already fitted to the
canister) fit into the inner
ring location keyholes and
the remote bracket fits into
the 4 slots simultaneously.
Push firmly into position.

(5) Secure the inner ring
canister assembly in position
with the washer collar
self-tapping screw
(provided) using either a
standard screwdriver or a
socket head (1/4” or 7mm).
(6) Repeat (2) to (5) for all
other inner ring canister
assemblies.

Step 2 - Prepare and install the outer ring of canisters.

(1) Select the outer ring
canister assembly.

(2) Fit the canister screws
into the outer ring of keyhole
slots on the turntable. Push
firmly into position.

(3) Locate the 2 guide holes
directly below each canister
and fasten the screws
(already located in canister)
with a Philips (No. 2)
screwdriver.
(4) Repeat steps (2) to (3)
for all other outer ring
canister assemblies.