Fast & Fluid II Series Blendorama - Manual (Page 18)

p17
© Fast & Fluid Management, Blendorama series II
Preventitive maintenance
A - Do’s & Don’ts
DO
Keep the machine clean and display advertising promoting good housekeeping.
DO
Keep this operation manual, Allen key, valve sleeve wrench and spare parts in a
convenient place to assist in regular maintenance
DON’T
Use the piston or valve assembly of each pump as a handle to rotate the
turntable. Instead, use the canister or edge of the turntable.
DON’T
Attempt to replace the valve plate – if this is faulty, the whole valve assembly
must be replaced
DON’T
Make any adjustments to the stirring timer. This unit has been factory set
and should only be adjusted by authorized personnel.
B - Daily maintenance
Clean the brush tray, refill canisters and run morning program
> >
Wipe down stand, canisters
and pumps with a moistened
cloth Check nozzle outlets for dried
colorants. If dried colorant is found to
be blocking the nozzle,
remove the nozzle by
pushing down on the top of
the nozzle.