Fast & Fluid II Series Blendorama - Manual (Page 17)

p16
© Fast & Fluid Management, Blendorama series II
Step 6 - Discharge the pump
> >
While still holding the pump
handle in the raised
position, pull the
spring-loaded valve lever (at
the base of the pump)
forward its full travel Holding the valve lever fully
forward, press the red
handle down with a smooth
and steady stroke until the
red handle is fully depressed. Ensure that both the red and
black handles are fully
depressed against the end
cap. All the colorant has
now be discharged and the
valve lever can be released
Repeat the charging and
discharging process for each
colorant specified in the
formula
If you have to tint more than one container of the same color, leave the
gauges set at the required reading and simply recharge and discharge each
pump in turn in the order nominated by the tint formula.