Fast & Fluid II Series Blendorama User Manual

Page 12

p11

Step 2 - Purging the pumps

Set the gauge or gauges of
each pump to its halfway
point by operating the spring
loaded button then lifting the
gauge by its handle

Without operating the valve
lever lift the red pump
handle to its maximum
travel (this draws the
colorant into the canister)

Discharge the colorant back
into the canister by
depressing the red pump
handle fully. Repeat this
process 30 times.

Step 3 - Purging the valve

Lift the red pump handle to
its maximum travel

Place a clean can or paper
cup under the dispensing
nozzle

Hold the valve lever open by
pulling the spring loaded
lever forward its full travel