Fast & Fluid II Series Blendorama - Manual (Page 20)

p19
© Fast & Fluid Management, Blendorama series II
C - Weekly maintenance
If the dispenser is not used on a regular daily basis, the following procedure
should be carried out.
> >
Examine the machine for
loose canisters and loose
cylinder caps. Tighten if
necessary Examine gauges for
damaged graduated scales
or worn holes and replace if
necessary Raise the pump handle to its
maximum extension and
examine the pump shafts for
signs of colorant. This
indicates that the piston seal
will need replacement (see
Chapter VI - C,D,E)