Fast & Fluid II Series Blendorama - Manual (Page 11)

p10
© Fast & Fluid Management, Blendorama series II
Operation
A - First time operation
Step 4 - Preparing the dispenser
> >
Ensure that the machine is
switched off at the wall
socket Stir each can of colorant
thoroughly with a flat
bottomed paddle or palette
knife to reincorporate any
settled pigment Ensure that the machine is
adequately supported and
clear of obstructions
>
Remove the lids from all
canisters Pour the contents of each
colorant can into the correct
canister. Discard the
colorant can and replace the
canister lid
Attention! Always wear eye protection when handling colorants