Fast & Fluid II Series Blendorama - Manual (Page 15)

p14
© Fast & Fluid Management, Blendorama series II
Step 3 - Bring canister to the correct position
>
Depress and hold the detent
lever to release the
turntable. You can lock the
detent lever in the release
position by pushing it
sideways. Rotate the turntable so that
the pump of the appropriate
canister is directly over the
can. If the detent lever it
released it will lock the
canister into the correct
position. You may need to
move the turntable slightly
from side to side to allow
the locking pin to locate the
locking hole.
When rotating the turntable, DO NOT use the canisters or pumps as
handles. Use the edge of the turntable.