2 specifications, 3 service warnings, 4 fuses and relays – JLG 534D-10 User Manual
Page 151: 1 cab, 2 engine compartment, Engine start circuit, Charging circuit, Windshield wiper motor (if equipped), Specifications, Service warnings
9.3
534D-9, 534D-10 & 544D
Electrical System
9.2
SPECIFICATIONS
Electrical system specifications are listed in Section 2,
“General Information and Specifications.”
9.3
SERVICE WARNINGS
John Deere
Cummins
9.4
FUSES AND RELAYS
9.4.1
Cab
The fuse panel is located at the bottom right corner of the
dash.
The relay is located at the right front corner of the cab,
under the dash.
9.4.2
Engine Compartment
The relay is located at the right rear corner of the engine.
CAUTION
When doing welding anywhere on the machine
disconnect the wire harness from the Engine Control
Module mounted beside the engine and disconnect
both cables from the battery(s) and clamp both cables
together.
MX0940
ECM CONTROL MODULE
MX1260
ECM CONTROL MODULE