Brother HL-3400CN Series - Manual (Page 59)

CHAPTER 3 BEFORE WORKING WITH THE PRINTER
3–5
ABOUT THE CONTROL PANEL
Selecting the Local Language Display
The display shows the current printer status. When you operate the
control panel buttons, it shows functions and settings. If a problem
occurs, it shows the corresponding error message. These messages are
displayed in several languages. The default is English.
• English • German • Spanish
• French • Dutch • Italian
To change to another language:
1. Turn off the printer.
2. Hold down the Form Feed button and turn on the printer.
The message “SELF TEST” appears. Continue holding down
the Form Feed button until the message changes to
“LANG.=ENGLISH * ”. Release the Form Feed Button
3. Press the ▲ or ▼ button until your desired language appears on
the display.
4. Press the Set button to make the selected language messages
effective.
An asterisk (*) appears at the end of the display for a short
time, and then the printer automatically returns to the on-line
state with the selected language on the display.