Brother HL-3400CN Series - Manual (Page 125)

USER’S GUIDE
4–54
Setting the Font and Character Set in the EPSON FX-850 or
IBM Proprinter XL Mode
When the EPSON FX-850 or IBM Proprinter XL mode has been selected,
the font and character set can be selected.
Message To do:
SELECT FONT Set the font
CHARACTER SET Set the character set
TABLE PRINT Print the code table
To select the font and character set in the EPSON
FX-850 or IBM Proprinter XL mode, follow these steps:
1. Press the Sel button to take the printer off-line.
2. Press the Font button.
The display shows the font setting menu. You can skip the font
setting menu and advance to the character set setting menu
with the ▲ or ▼ button.
3. Press the Set button.
When you enter the “SELECT FONT” menu, you can select
the internal font, optional slot font or permanent download
font.
Press the ▲ or ▼ button until the desired font source appears
on the display.
Display Message Font Source
INTERNAL FONT Internal font of the printer
DEVICE1 FONT Optional card font in slot 1
DEVICE2 FONT Optional card font in slot 2
PERMANENT FONT Permanent download font defined in the HP
emulation mode
Since these steps instruct you how to select the standard font,
select the “INTERNAL FONT” message.