Brother HL-3400CN Series - Manual (Page 145)

USER’S GUIDE
4–74
RESET Button
You can reset the printer with the Reset button. The print data that the
printer has already received from the computer is cleared and the printer
settings are restored to the user settings or factory settings.
Any temporary download fonts and macro settings selected with
commands in HP PCL5C mode are also cleared.
To reset the printer, follow these steps:
1. Press the Sel button to take the printer off-line.
2. Hold down the Shift button and press the Reset button.
When you enter the reset mode, the display shows the first reset mode
item.
3. Press the ▲ or ▼ button until the reset mode you want appears on the
display.
Display Message Reset Mode
RESET PRINTER Resets the printer and restores all printer settings–
including command settings–to settings you have
previously made.
RESET SETTING 1
RESET SETTING 2
Resets the printer and restores all printer settings–
including command settings–to the selected number
(1-2) of user settings you have previously made
with the
Mode button.
FACTORY SETTINGS Resets the printer and restores all printer settings–
including command settings–to the factory settings.
See “
List of Factory Settings .”
RESET PARTS LIFE This menu appears only when a maintenance part is
recommended for replacement.
Resets the life counter of the maintenance part that
has been replaced. See
Chapter 5 for detailed
information.
Exit Exits from the reset mode. The printer is not reset.