Brother HL-3400CN Series - Manual (Page 53)

CHAPTER 2 SETTING UP THE PRINTER
2–23
Install the Printer Driver
Computer Requirements
The following are the minimum computer requirements to setup and
operate the printer:
CPU: 80486 or higher
(Pentium recommended)
RAM: 8 MB or more for Windows

95/ 98, 3.1x and Windows
NT

4.0
(16 MB or more recommended)
Hard Disk Drive: 10Mbyte free space available for the driver and Fonts
(more space is necessary for printing)
OS: Windows

95/ 98, 3.1x and Windows NT

4.0
For Windows
   
3.1x, 95/98 & Windows NT
   
4.0 Users
You can configure your Windows Operating System for this printer by following
the Initial Setup instructions on the supplied CD-ROM.
1. Turn your PC power on and insert the CD-ROM into the CD-ROM drive.
2. The opening screen will appear automatically in Windows

95/98 or Windows
NT

4.0.
3. If the screen does not appear, click 'Start' and choose 'Run', enter the CD drive
letter and type 'START.EXE'.
If you are using Windows

3.1x, click 'Run' from the 'File Menu' in 'Program
Manager', enter the CD drive letter and type 'START.EXE'.
4. Select 'HL-3400CN series', and then select the language you require. Follow
the instructions that appear on screen..
5. Click the 'Install Driver & Software', select the printer driver type you want to
install.
6. After the printer driver has been installed, the HL-3400CN series window will
appear. Follow the onscreen messages to complete the installation.