2 settng the loggng interval and duraton -13, 2 setting the logging interval and duration – Bacharach PCA 2 24-9448 User Manual

Page 47

Instruction 24-9448

4-13

Operation

4.12.2 Setting the Logging Interval and Duration

The loggng nterval s the length of tme between measurements, whle

the loggng duraton s the tme allocated to the loggng process. Set the

loggng nterval and duraton as follows:

TIP: If the duration is set for more than 10 hours, we recom-

mend using the optional AC power adapter to power the

analyzer.

1. As soon as loggng s turned ON as descrbed

n Secton 4.12.1, the LOGGING INTERVAL

screen appears.

2. Use the buttons to hghlght the desred

nterval, and then press ENT to make the

selecton and dsplay the LOGGING DURA-

TION screen. In ths example, 1 mnute has

been selected

3. Use the buttons to hghlght the desred

duraton, and then press ENT to make the

selecton and dsplay the LOGGING SUM-

MARY screen. In ths example, 2 hours has

been selected.

NOTE: If the selected duration requires more

memory than is currently available, then the

analyzer will automatically select the longest

duration possible for the selected interval.

LOGGING INTERVAL
1 sec
5 sec
10 sec
15 sec
30 sec

1 min

2 min

(more)

LOGGING DURATION
5 min
10 min
15 min
30 min
1 hr

2 hr

5 hr

(more)