Toshiba Magnia Z300 - Manual (Page 72)

[Add] button Used to manually enter in the input field at left MAC addresses to
be permitted to access the network.
[Access permitted MAC
address] Lists the MAC addresses of the wireless LAN stations that are
permitted to access the network.
[Remove] button Used to remove an access-enabled MAC address. A MAC
address selected from the [Access permitted MAC address] list
can be removed.
[Access rejected MAC
address] Lists the MAC addresses of the wireless LAN stations that were
rejected by the access point.
[Enable] button Used to permit a MAC address, selected from the [Access
rejected MAC address] list, to access the network.
One or more MAC addresses can be selected.
[All remove] button Clears all MAC addresses from the [Access rejected MAC
address] list.
[Apply] button Ends up saving the selected item.
[Reset] button Ends up without saving the selected item.
3.5.3.2 [Advanced] setup page
Jump to the [Advanced] setup page shown below by the "Advanced" link on the left of the [Basic] setup page.
Memo
As explained above, you need to undergo authenticate before accessing this page.
Notice
The setup items of the details setup page are not required for the usual operation. To change the setup items of
the details setup page, you need a detailed knowledge about the network; therefore, do not change them unless
required.
64