Toshiba Magnia Z300 - Manual (Page 54)

[Reauthenticate before
WEP key distribution]
check box
Specify whether to make authentication when distributing the WEP
key.
By default, this check box is unchecked.
[WEP key change interval
(seconds)]
edit box Specify in seconds the interval in with which the WEP key is
changed and distributed to each station
The default value is 600 seconds.
[Key Length]
radio button Specify the length of the WEP key to be distributed.
The default value is 5 bytes.
[Enable WEP]
check box WEP is short for Wired Equivalent Privacy. This function encrypts
communication data for improved security.
When this check box is selected, you must select one of
cryptographic keys 1 to 4 explained next and specify the
cryptographic key in the edit box.
A station that does not use WEP or whose key is inconsistent
cannot be connected to the access point.
The check box is selected by default.
[Keys 1 to 4]
edit box Select one of the keys 1 to 4 and specify the WEP cryptographic
key.
Use an ASCII character string or hexadecimal number. Key length
must be 5 or 13 bytes. (The max key length depends on the card.)
All keys are set to “WEP00” by default.
[RADIUS Server 1 to 4]
check box Enable or disable the RADIUS server setting.
The access point sends inquiries to valid RADIUS servers until the
authentication succeeds or fails.
By default, the setting is disabled.
[IP Address]
edit box Set the IP address of the RADIUS server.
By default, the IP address is not set.
[Port]
edit box Set the port number of the RADIUS server.
The default value is 1812.
[Shared Secret]
edit box Set the shared secret of the RADIUS server. Shared secret is a
password for communication between the access point and the
RADIUS server.
By default, the shared secret is not set.
[Time-out]
edit box Set a time-out value in seconds.
The default value is 20 seconds.
46