Using the utility, 2 using the utility – Toshiba Magnia Z300 User Manual
Page 59
3.
In the [Computer Name] field, enter the computer name or IP address of the server (access point).
4.
In the [Community Name] field, enter the name of the community to be used.
5. Press
the
[Connect] button.
3.3.2 Using the utility
The method for using the utility is the same as when you use the Access Point Configuration Utility in local
mode (on the server). However, the [Hardware resource] page is not displayed.
For details, see the following section.
[3.2 Access Point Configuration Utility (Local)]
Memo
If you use the utility from a wireless LAN station, do not write the information to the access point, which the
station is connected to.
51
This manual is related to the following products: